Magic Surf

MAGIC SURF
Get that Vintage snake flow with our modern blended wax.
Months of R&D went into making this custom blended Surfactant

Magic SURF can also modify our modern wax to be used with smaller lamps including 20oz, Capri, Consort, Mediterrain, and Mathmos Jet series, etc.

Magic has been used with other modern waxes; however, we cannot guarantee that it will work with all others. 

Available in 1/2oz and 2oz bottles

NOT for use with vintage wax

Directions
Coat the globe with SURF normally, as directed in the restoration instructions available under the tips and tricks heading of this website.
Use the supplied pipette to add in 1ml increments of Magic Surf to the globe fluid until the desired flow is achieved when it reaches a normal operating temp of 125F.

Wait ½hr. between adjustments for the Magic Surf to fully saturate the fluid

Suggested average amounts of Surfactant or additives are in the chart below (DO NOT EXCEED)

12oz. 2-4ml of SURF + add 0.5-2ml of Magic Surf as needed

20oz. 4-6ml of SURF + add 1-3ml of Magic Surf as needed

32oz. 8-10ml of SURF or optionally add 1-3ml of Magic Surf as needed
52oz. 15-17ml of SURF or optionally add 2-4ml of Magic Surf as needed

250oz. 55-60ml of SURF - No Magic Surf is needed

Tip: The more you use, the more you will break the surface tension of the wax and snakey blobs will be created.
If you use too much Magic Surf,  You will experience multiple balls and possible micro-bubbles of wax. To repair this issue, let the globe cool and simply remove some fluid from the globe.
Replace the removed amount with distilled water to rebalance the level of Magic Surf.